[Elecraft] MH2 Mic

[David Cutter]

The manufacturer has used the wrong cable type, it will not get better with 
time.  It should not be ordinary pvc.  Send it back, there's a batch 
problem.

David
G3UNA

----- Original Message ----- 
From: "DW Holtman" <tubestuff at comcast.net>
To: "Ken Kopp" <k0pp at rfwave.net>; <elecraft at mailman.qth.net>
Sent: Thursday, March 27, 2008 2:38 AM
Subject: Re: [Elecraft] MH2 Mic


> Ken,
>
> It is not from lack of use, it is very, very stiff.
>
> Best,
> DW Holtman
> WB7SSN
>
> ----- Original Message ----- 
> From: "Ken Kopp" <k0pp at rfwave.net>
> To: <elecraft at mailman.qth.net>
> Sent: Wednesday, March 26, 2008 8:13 PM
> Subject: [Elecraft] MH2 Mic
>
>
>> The MH-2 that I received with my K3 has ... in my
>> opinion ... a really "stiff" coiled cord.  It's capable
>> of sliding the radio on the desk when the mic is held about 24" from the 
>> radio.  At this point the turns of the coiled portion of the cord are 
>> (only) about 1/4" apart.
>>
>> Perhaps it just needs use ....
>>
>> 73! Ken Kopp - K0PP
>>       ElecraftCovers at rfwave.net
>>