[Elecraft] Reseting a K2

[Dave Andrus]

You've got it--

1. Turn the K2 off.
2. Hold down the 4, 5, and 6 keys
3. Turn the K2 back on.

The EEPROM will be re-written with the factory defaults for all  
settings, which will require that you re-run all of the calibration  
functions again.

BTW, it's on Page 106 of the manual.

73,

Dave K7DAA
http://www.k7daa.com

On Mar 25, 2008, at 8:37 PM, DW Holtman wrote:

> Hello,
>
> A few weeks ago, someone posted a procedure for reseting a K2. It  
> was a sequence something like holding the 4,5 and 6 buttons while  
> powering up.
>
> What is the sequence? Does it reset everything, filters, sidetone  
> etc to it's factory settings? I could not find it in the manual or  
> in the archives.
>
> Thank you in advance for your help.
>
> Best,
> DW Holtman
> WB7SSN
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com