[Elecraft] Rigblaster/Signalink for K3?

[David Cutter]

Sorry if this has been answered already: presumably, this can also be used 
with an SDR rx on the IF?

David
G3UNA


> The nice thing about an 'all-in-one' solution:
>
> 1) Just one USB cable connected to your radio.
> 2) Very high quality soundcard.
> 3) Winkeyer built-in.
> 4) Extra COM ports.
> 5) Monitor the audio.
> 6) One chunky cable from the unit to your radio.
>
> End result is a very tidy installation with a high-quality soundcard.
>
> Simon Brown, HB9DRV
>
> --------------------------------------------------
> From: "Dave G4AON" <elecraft at astromag.co.uk>
>>
>> What does the K3 lack that a Rigblaster or Signalink provides? I use mine 
>> with MMTTY, N1MM logging/CW keying and DM780 straight to a sound card. 
>> The TX control in DM780 is via the normal serial cable, in MMTTY via a 
>> simple single transistor keying circuit built into the 15 way accessory 
>> plug. CW keying from N1MM logging is via the serial lead, I also have a 
>> K1EL "Winkey" which works fine too. The K3 has transformer isolated line 
>> in and line out sockets.
>>
>