[Elecraft] RE: Elecraft Digest, Vol 47, Issue 46

[Bob DeHaney]

I am receiving SOME digests truncated as shown here.  The size of the digest
is correct, but I can only read the first 3 messages as you can see.  My
Email client is Outlook 2007 (and no don't tell me I should use some other
client). I believe some character or string is being sent like a single
period in a line for instance, that tells the client to truncate the digest.
A Google search says other clients sometimes also have this problem.  Is
this a fix at the Elecraft end or at the Outlook end?  Suggestions welcome.

Vy 73, Bob DJ0MBC/WU5T


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
elecraft-request at mailman.qth.net
Sent: Sonntag, 23. März 2008 00:30
To: elecraft at mailman.qth.net
Subject: Elecraft Digest, Vol 47, Issue 46

Send Elecraft mailing list submissions to
	elecraft at mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
	http://mailman.qth.net/mailman/listinfo/elecraft
or, via email, send a message with subject or body 'help' to
	elecraft-request at mailman.qth.net

You can reach the person managing the list at
	elecraft-owner at mailman.qth.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Elecraft digest..."


Today's Topics:

   1. K3 Configuration (Ian J Maude)
   2. Re: [K3] DVK and mic routing (David Ferrington, M0XDF)
   3. Re: K3 and linear amp (Brendan Minish)
   4. Re: K3 F/W versions...just curious (David Ferrington, M0XDF)
   5. Re: OT: Bose QC Mic Modification (David Ferrington, M0XDF)
   6. Re: K3 Configuration (Ken Wagner)
   7. Re: K3 F/W versions...just curious (David Pratt)
   8. Re: K3 Configuration (Bill W4ZV)
   9. Re: K3 F/W versions...just curious (David Ferrington, M0XDF)
  10. Re: K3 Configuration (Ian J Maude)
  11. KX1 - U9 - 77L06 - outputing 8.03 Volts... (Nicolas Pike)
  12. Re: OT: Bose QC Mic Modification (Brett Howard)
  13. Re: Fix the old amplifier......leave the K3 alone! (AD6XY - Mike)
  14. Re: KX1 - U9 - 77L06 - outputing 8.03 Volts... (Brett Howard)
  15. RE: K3 and linear amp (Roger Marrotte)
  16. FS: K2 battery + bracket (cx7tt at 4email.net)
  17. Re: Come along for the ride! (David Ferrington, M0XDF)
  18. Re: Fix the old amplifier......leave the K3 alone!
      (R. Kevin Stover)
  19. Elecraft Reflector policy/guidelines (DOUGLAS ZWIEBEL)
  20. Re: K3 Configuration (Toby Deinhardt)
  21. Re: K3 F/W versions...just curious (Jim Cox)
  22. Re: [Bulk] Re: [Elecraft] OT: foot switch - why? (John Payne)
  23. Re: K3 Configuration (Ian J Maude)
  24. K3 and linear amp (ni0c)
  25. Re: K3 and linear amp (Toby Deinhardt)
  26. WB3AAL out on the AT 22 March (Ron Polityka)
  27. Re: K3 Configuration - RESTORE (Bill W4ZV)
  28. RE: K3 and linear amp (Evert Bakker (PA2KW))
  29. RE: Fix the old amplifier......leave the K3 alone!
      (Evert Bakker (PA2KW))
  30. OT Signatures, quotes, et. al.... (Dave G.)
  31. Reverting Firmware (David Ferrington, M0XDF)
  32. Re: K3 Configuration (David Ferrington, M0XDF)
  33. RE: Reverting Firmware (Dick Dievendorff)
  34. OT - Signatures & quotes (Ken Kopp)
  35. Re: Reverting Firmware (David Ferrington, M0XDF)
  36. Reverting Firmware on Wiki (Don Rasmussen)
  37. Re: OT Signatures, quotes, et. al.... (David Cutter)
  38. Re: OT Signatures, quotes, et. al.... (David Ferrington, M0XDF)
  39. Re: OT - Signatures & quotes (Trevor Smithers)
  40. CW Decode (Frank MacDonell)
  41. Re: OT - Signatures & quotes (Thom LaCosta)
  42. Updates to Reverting Firmware (David Ferrington, M0XDF)
  43. Brain damage (Scott McDowell)
  44. K3 MW DXing (Gil Stacy)
  45. K2 BFO Test problems ( Align. and test, Part II ) (Toni Martin)
  46. Re: K3 MW DXing (David Ferrington, M0XDF)
  47. TX ESSB...K3 (John)
  48. Re: CW Decode (WILLIS COOKE)
  49. Learning The Code (K2ZR)
  50. RE: TX ESSB...K3 (Jim)
  51. Re: CW Decode (G4ILO)
  52. K2 Lightning damage (Nick Henwood)
  53. K3: concern about flexing FP board (DOUGLAS ZWIEBEL)


----------------------------------------------------------------------

Message: 1
Date: Sat, 22 Mar 2008 10:02:03 +0000
From: Ian J Maude <ian at gb7mbc.net>
Subject: [Elecraft] K3 Configuration
To: elecraft at mailman.qth.net
Message-ID: <47E4D91B.20102 at gb7mbc.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Hi all,
Can I redo the K3 config on 5W with the PA physically in place or do I 
need to remove it?  I am no at all happy with the output power so I want 
to go through the config again.  Like others, I find that on SSB, the 
output does not peak at all well.
TX ALC is on but my TXGN HP Pr80 is down at 20, much lower than I have 
seen in other reports.

73 Ian

-- 

Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455



------------------------------

Message: 2
Date: Sat, 22 Mar 2008 10:03:01 +0000
From: "David Ferrington, M0XDF" <M0XDF at Alphadene.co.uk>
Subject: Re: [Elecraft] [K3] DVK and mic routing
To: "David Douglass" <vk2nu at bigpond.net.au>
Cc: elecraft at mailman.qth.net
Message-ID: <EF77667B-A99D-4DE6-B3F8-812F704753BF at Alphadene.co.uk>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes

No, afraid its not possible, you have to pick one of either front ,  
rear or line in.
I'd like to be able yo use both rear and line-in simultaneously, for a  
similar method.
Separating Line-In from the Mic would be good.
-- 
A bit of fragrance always clings to the hand that gives the rose.
-Chinese proverb

On 22 Mar 2008, at 03:12, David Douglass wrote:

> Hi All,
>
> Looks like I'll be using my K3 in the upcoming CQWW WPX SSB contest,  
> and have a question regarding routing the mic for DVK.
>
> Is it possible to enable the front panel, and rear panel inputs  
> simultaneously? I'd like to connect the rear panel input directly to  
> the soundcard output on the PC, whilst still using my headset on the  
> front panel input?? From what I can read in the manual I can only  
> enable one input at time in the menu?
>
> I know I could plug my heil into the soundcard and work around that  
> way, but using both inputs would save me having to make a jumper  
> cable, as my heil headset is hard-wired into an 8 pin connector!
>


------------------------------

Message: 3
Date: Sat, 22 Mar 2008 10:10:55 +0000
From: Brendan Minish <ei6iz.brendan at gmail.com>
Subject: Re: [Elecraft] K3 and linear amp
To: hank k8dd <hank.k8dd at gmail.com>
Cc: elecraft at mailman.qth.net
Message-ID: <1206180655.3910.23.camel at localhost.localdomain>
Content-Type: text/plain; charset=utf-8


On Fri, 2008-03-21 at 18:33 -0700, hank k8dd wrote:

> The problem with Elecraft rigs switching Ameritron amps
> has existed with the K2/100 and, so it appears, now with
> the K3/100.  

I think the problem is not elecraft rigs but amplifiers that have
unreasonably slow switching times.
10msec or longer is unreasonably slow and I think it's 'unreasonable' to
blame the manufacturer of the radio because the amp manufacturer saved a
few bucks and used a cheap, slow relay instead of a proper RF relay. 

None of my Icoms give me the ability to alter the key delay for slow
amplifiers either.

The correct approach is to mod the amp to improve matters. the other
option is to use the PTT input with a footswitch to take care of RX/TX
changeover  

 
73
Brendan EI6IZ 


-- 
Donb