[Elecraft] K3 XMIT in SSB modes

[ON4WIX]

Same here - one press on XMIT puts the rig in TX, press again and the rig 
switches back to RX. I too have MCU 1.78 in my K3.
I also second the proposal for the use of a footswitch - it frees up both 
hands. The Heil footswitch is FB quality and reasonably priced.

73 and enjoy the weekend

Glenn ON4WIX
K2/100 #5361
K3/100 #0192
----- Original Message ----- 
From: "Dave G4AON" <elecraft at astromag.co.uk>
To: <elecraft at mailman.qth.net>
Sent: Friday, March 21, 2008 1:31 PM
Subject: [Elecraft] K3 XMIT in SSB modes


> Julian
>
> Mine doesn't behave like that, it works as expected and toggles the TX on 
> /off (MCU firmware 1.78). However for your desk mic, wouldn't a foot 
> switch be more use?
>
> 73 Dave, G4AON
> K3/100 #80
> ----------------------
> Having just loaded the latest firmware I find that pressing XMIT in SSB 
> puts
> the rig briefly into TX and then it goes back to RX again. Is this a
> deliberate change, or did I imagine that this worked in the first place?
>
> -----
> Julian, G4ILO K3 s/n: 222 K2 s/n: 392
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG. Version: 7.5.519 / Virus Database: 269.21.7/1335 - Release 
> Date: 19/03/2008 9:54
>
>