[Elecraft] K3 AF PA

[Bob W9RFS]

I did a little more reseach and found the power amp for the speaker output in
the k3 schematics. The device is a LM4950TS. Here's a link:
http://www.national.com/pf/LM/LM4950.html#Datasheet  
Looks like 3.1 watts into four ohms with less than 1% THD. Is this correct
or am I missinterpreting the specs? Thanks,


Brett Howard wrote:
> 
> 2.5 Watts into 4 ohms if you're willing to put up with 10% THD.  Figure
> 2 watts into 4 ohms.
> 
> 
> On Fri, 2008-03-14 at 20:41 -0700, Bob W9RFS wrote:
> 
>> Does anyone know how many watts the audio amp is that feeds the speaker
>> output connector?
>> Thanks!
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 
> 

-- 
View this message in context: http://www.nabble.com/K3-AF-PA-tp16062844p16137675.html
Sent from the Elecraft mailing list archive at Nabble.com.