[Elecraft] K3/10 For Sale or Trade

[dolfindon at msn.com]

Hi
 
I also found the black 4-40 1/4 screws to be short. I had 8-10 of the 3/16 black pan heads, 5 or 6 of the black flatheads and 5 or 6 silver 4-40 1/4 left over. I also had plenty of lockwashers. I just used three of the silver 4-40 1/4 on the transistors in place of the black screws. I think Elecraft needs to increase the number on these 1/4 inch screws and maybe include a couple of spares like the rest of the black hardware. The case screws are the ones that tend to get lost when options or mods are installed so a few extra is always nice.
 
Don Brown
KD5NDB



> Date: Sun, 16 Mar 2008 09:23:35 -0700> From: julian.g4ilo at gmail.com> To: elecraft at mailman.qth.net> Subject: Re: [Elecraft] K3/10 For Sale or Trade> > > > Luther B. Phillips wrote:> > > > Only deviation from instructions was the use > > of 2 zinc pan-head screws to secure the output transistors to the bottom > > panel. (was short two black screws)> > > I did the same when building mine, and so did a couple of other people> judging by a couple of recent posts on the Zerobeat K3 forum. I wonder how> common this is, and whether Elecraft has actually miscalculated the number> of screws required?> > -----> Julian, G4ILO K3 s/n: 222 K2 s/n: 392> G4ILO's Shack: www.g4ilo.com> Zerobeat Ham Forums: www.zerobeat.net/smf> -- > View this message in context: http://www.nabble.com/K3-10-For-Sale-or-Trade-tp16080516p16080801.html> Sent from the Elecraft mailing list archive at Nabble.com.> > _______________________________________________> Elecraft mailing list> Post to: Elecraft at mailman.qth.net> You must be a subscriber to post to the list.> Subscriber Info (Addr. Change, sub, unsub etc.):> http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm> Elecraft web page: http://www.elecraft.com