[Elecraft] Question on K2 K3 100 Watt PA's

[Mike B]

Good evening, DW.  Yes, this has been asked before (and is a logical question to 
me), and made it into the FAQ.  I found 2 topics which apply.  No need to fill 
email in-boxes with what's already on the web, so just the links:

http://www.elecraft.com/K3/K3FAQ.htm#auxbus

http://www.elecraft.com/K3/K3FAQ.htm#KPA3%20integration

Hope this answers you questions.

73,

Mike
KW1ND

DW Holtman wrote:
> Hello,
> 
> I have a question which might not make much sense. I have seen the Web 
> links to a couple of people who have remotely mounted a 100 watt amp 
> from a K2 and an antenna tuner in an EC-2 enclosure.
> 
> Would it be possible to use the same remote amp/tuner to work with a K3? 
> The specs are basicly the same, ie 10 watts in, 100 watts out. It would 
> savbe a lot of $$$ if one remote amp/tuner could be used for two radios. 
> I'm thinking the communication to the amp would be the problem, but not 
> sure. Has this been brought up before?
> 
> Best,
> DW Holtman
> WB7SSN