[Elecraft] Re: K3 IF NB Question

[John]

At 04:50 PM 10/03/08, you wrote:
>You might be missing the IF NB :)

I'm sure I installed it....I go into config and change it from not 
installed to nor..OK


>See if it is seated properly.  See if there is an enable for 
>it.  Have you used it before?

I'll pop the lid and have a look. I don't think it would show nor if 
it was mis-installed.

I haven't tried it before due to other issues. I have #501 and the 
ATU doesn't function and there is an intermittent on the mixer board 
that injects broadband noise, I think that little pot on the board is 
intermittent. I contacted Elecraft last Monday and they said the new 
boards were on the way. I found out today they haven't been shipped 
yet due to a oversight. I can understand that. So, i thought I would 
go ahead and see if I could get the other features adjusted, the rig 
does work. Another gotcha it looks like.
I used an anti static wrist band and mat during construction. Having 
build a couple K2's and a K1 with no problems I figured a modular K3 
would be a snap.
I got the lemon.



>Seriously, you should get a display on VFO B.  I was playing with it 
>last night so I think it hasn't disappeared.


I thought I should too.


>At 3/10/2008 06:23 PM, you wrote:
>>On P.24 of the manual, tap NB,  HOLD LEVEL, adj VFO A to turn DSP 
>>on and adjust the level, works fine. IF NB shows N/A no matter how 
>>much I adjust VFO B knob. What am I missing? When you turn the NB 
>>on (TAP), how do you know what kind of blanking is taking place, 
>>DSP or IF? Running the latest firmware, 1.75 & 1.57. I know, 
>>RTFM...I think I have.
>>
>>John
>>k7up
>>K2's 2012, 2223
>>K1 637
>>Things are more like they are now then they've ever been before.
>>_______________________________________________
>>Elecraft mailing list
>>Post to: Elecraft at mailman.qth.net
>>You must be a subscriber to post to the list.
>>Subscriber Info (Addr. Change, sub, unsub etc.):
>>http://mailman.qth.net/mailman/listinfo/elecraft
>>
>>Help: http://mailman.qth.net/subscribers.htm
>>Elecraft web page: http://www.elecraft.com