[Elecraft] k3; Firmware and Config Utility?

[Dick Dievendorff]

My plan for the K3 Utility is to have a way to save short(er) sets of
configuration options, such as the tx eq and mic select / bias / front/back,
etc.  You'll pick from a tree view of what should be saved.  The more you
save, the longer it takes to save and restore.  You can name the saved
config file anything you want.  You then restore from that file to get those
settings back.  My challenge right now is to organize the very large number
of things that can be saved into a meaningful hierarchy so that things that
you want to save together appear near one another.  I can't have, for
example, AntiVox at the top of a long list and "Vox gain" at the bottom of
the list; these should be organized together in some sort of microphone
category. 

Dick, K6KR



-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bill W5WVO
Sent: Sunday, March 09, 2008 1:44 PM
To: Dave G4AON; elecraft at mailman.qth.net
Subject: Re: [Elecraft] k3; Firmware and Config Utility?

Dave G4AON wrote:

> I would also like to have EQ settings set per mode and/or per mic socket. 
> Switching between audio data modes and a microphone with high frequency 
> boost set on the TX equaliser ... is not possible without spending a
couple 
> of minutes re-setting the equaliser each time the microphone is used!

Second that, Dave. I plan on doing a lot of switching back and forth between

DATA A and USB, which require completely different TX/RX equalization 
philosophies. Hopefully this is on "The List."  :-)

Bill W5WVO 

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com