[Elecraft] K3 Updates

[Dick Dievendorff]

It normally takes between 2 and 5 minutes to load both the MCU and DSP1
firmware. It's slightly faster with a "real" serial port than with a USB to
Serial adapter.

There is a row for the DSP2 which is related to the KRX3 Second Receiver
Option. The "Installed in K3" column should show "N/A" unless the KRX3 2nd
receiver option is installed and enabled through the CONFIG menu.

The K3 Utility Help has a description of the Firmware page, section by
section, and there is a Help index entry for DSP2 (and DVR) that describe
what they're for.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Lee Buller
Sent: Tuesday, March 04, 2008 10:55 AM
To: Elecraft Reflector
Subject: [Elecraft] K3 Updates



Did my first update ot the K3 firmware last night.  I was surprised how long
it took.  About a minute for the Rig and about 4 minutes for the DSP unit.

Question...there was another file DS2 or something like that.  Is that for
the sub RX when it is installed?

Lee
K0WA
443



In our day and age it seems that Common Sense is in short supply.  If you
don't have any Common Sense - get some Common Sense and use it.  If you
can't find any Common Sense, ask for help from somebody who has some Common
Sense.  Is Common Sense divine?
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com