[Elecraft] K2- L34

[Jack]

> The peak on L34 is difficult to discern because it is quite broad.  For 
> now, I suggest setting the slug 1 turn in from the top of the can.

1 turn from the top would be "off peak". It needs to be right on the top 
(and possibly further). I am assuming that something else in the circuit is 
not the correct value. But all components are in the right place.

Jack VK2CJC / MM0AXL
FISTS #9666 - CW QRP Club #753 - Elecraft K2 #6404
Mid North Coast Amateur Radio Group  www.mncarg.org