[Elecraft] Err Txg

[Brett Howard]

You need to select the slot number that your 2.7Khz filter is in.  I'm
getting the same ERR TXG failure on all bands with my rig and have low
receiver sensitivity and it just happened all of the sudden during field
day.  Not sure what happened but I'll be certain to post the findings
once I get it figured out what it takes to repair it.

On Sat, 2008-06-28 at 02:02 -0700, OE5CSP-Chris wrote:
> I could fix the problem with the misssing power jumper block- I installed the
> KPAIO 3 instead-thanks for your help by the way. Now I´m stuck again at the
> Transmiter Gain calibration.Err TXg occured on the display on every band and
> there is no power output.The rx seems to be deaf, I can only hear very loud
> signals.I checked everything again-the frequency offset is okay, but when I 
> came to the transmit crystal filter selection I could not select  a transmit
> filter value(e.g 2700kHz), but only the filter numbers(1-5)!
> Any ideas?
> 
> 
> 73,Chris-OE5CSP