[Elecraft] TESTING question

[Dave G4AON]

Hello Brian

Yes, I'd set up the filters and satisfy yourself the K3 is working 
before updating the firmware. You can set the filters and save the 
config from the updater program, saving the config will give you peace 
of mind in case something goes wrong.

The latest beta firmware has significantly improved noise reduction 
compared to what will be in your K3, so I wouldn't hesitate to recommend 
you download the 2.10 firmware. You need to also tick the box for 
"always load DSP data tables" as you can end up with funny faults with 
the DSP if you don't.

Welcome to the world of the K3!

73 Dave, G4AON
K3/100 #80
-----------------
Is this now the time to download the latest firmware?
Rather do the xtal filter setup there since have four filters. Any tips on
using the config program. Not interested in any beta software at this
point.

73 de Brian/K3KO