[Elecraft] Re: K3 Key-down on power-up [Solution?]

[wayne burdick]

Don,

By "a few seconds" I meant that it would have to detect the condition 
in that window, on power-up. But if it did detect key-down in this 
window, it would remain in the TX-inhibit condition for as long as the 
key-down persisted.

Wayne

On Jun 27, 2008, at 9:31 PM, Don Wilhelm wrote:

> Wayne,
>
> Given the situation, reasons, and consequences, I believe something 
> like what you suggested would be the best solution.  If you can extend 
> the time beyond 'the first couple of seconds' (enough time to change 
> the menu or power down), that would be helpful IMHO.
>
> 73,
> Don W3FPR
>
> wayne burdick wrote:
>> Dave,
>> I wanted to run a possible solution past you.
>> I could prevent the rig from being keyed (by any method) during the 
>> first couple of seconds that it's powered up. Instead, it could 
>> detect this case, and display a repeating message (something like: 
>> "KEYLINE IS ACTIVE") until you either remove the source of the keying 
>> or turn power off.
>> Thoughts on this?
>> 73,
>> Wayne
>> N6KR

---

http://www.elecraft.com