[Elecraft] And yet even More K2 Distorted TX audio on 10m and 12m only

[AJSOENKE at aol.com]

It sounds like you may have a spurious oscillation problem inside the box.  A 
spur can drain a high level of power, be off frequency, destroy finals, etc.  
The power on one band and none on the other sounds like you may have a 
component  misplaced or wrong value - including the tuning of the coil. Another 
possibility  is a bad solder joint so a critical capacitor value is not being 
seen.  I  suggest doing a real thorough visual on both sides of the board and 
maybe a  touch up on all the solder joints on those bands.
 
Al WA6VNN
 
 
 
In a message dated 6/27/2008 12:27:19 A.M. Pacific Daylight Time,  
jeff.laughlin at gmail.com writes:
I lied about lying about the power, after  realigning my filters my 12 and
10m power is normal. The signal is still  horrible, however.

-- 
73 de  n1ywb
_______________________________________________
Elecraft mailing  list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to  the list.
Subscriber Info (Addr. Change, sub, unsub  etc.):
http://mailman.qth.net/mailman/listinfo/elecraft     

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page:  http://www.elecraft.com
 



**************Gas prices getting you down? Search AOL Autos for 
fuel-efficient used cars.      (http://autos.aol.com/used?ncid=aolaut00050000000007)