[Elecraft] K3 - Sensitivity drop between Low and Hi power

[Vic K2VCO]

max iw0gxy wrote:
> Hi all, 
> I connected the XG2 signal generator to my K3 and I've injected 50microV
> into the antenna. I have the standard S9 but when I rise the power to 13 and
> up signal drop down to S8. If I turn the knob to 12W or less signal turn
> back to S9. 
> I've noted this behavior on signals on air but to be sure I've used my
> signal generator. 

I do not see any change in received signal levels here when switching 
between low and high power.
-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco