[Elecraft] Re: K3: Just hooked up my mic, no SSB out

[Joseph M. Durnal]

Still having trouble.  It does seem to transmit SSB - I enabled the 2
tone test and that worked when I pushed the PTT.  But it doesn't seem
that the mic is putting audio into the rig.

I'll need to run SSB for field day, I'd also be happy with suggestions
on what to do if this mic doesn't work.  I have a heil pro set with an
8 pin connector, but that doesn't seem to work either.  I have an
alinco and icom hand mic that I could borrow.  I also have a foot
switch.  I wonder if I could use the proset by plugging it into the
back panel w/ RCA, and a foot switch to key it?

Thanks & 73 de Joseph Durnal NE3R


On Fri, Jun 27, 2008 at 10:07 AM, Joseph M. Durnal
<joseph.durnal at gmail.com> wrote:
> Got my Elecraft MH2 mic this morning, but it doesn't seem to be
> working the PTT works, but there is no power out when I speak into the
> it.  Any ideas?  Now I'll spend some time with my nose in the manual.
>
> (I should have probably done my field day prep a little more in advance)
>
> Thanks & 73 de Joseph Durnal NE3R
>