[Elecraft] K1 band module.

[Sandy]

RIGHT!  I have....so far....have three band cards now.  40/30/20/15 four 
band, 80/40 two band, 160/80 two band.  IF it EVER opens again, 10 meters 
would be nice!

Lately, I have been using my K1 with the T1 external tuner as it's range is 
a bit greater than the internal tuner.

I wondered if say an 80-10 meter version would be possible with two "piggy 
back" boards sacrificing the internal tuner space?

73,

Sandy W5TVW
----- Original Message ----- 
From: "Mike Morrow" <kk5f at earthlink.net>
To: <elecraft at mailman.qth.net>
Sent: Wednesday, June 25, 2008 9:17 PM
Subject: Re: [Elecraft] K1 band module.


>> The K1 can remember settings for 6 bands...
>
> It'll do even better...it stores data for nine bands.  The K1 MPU
> stores a display calibration adjustment for each ham band that
> the K1 MPU allows to be assigned to a filter board.  Although
> there are only six HF bands provided by Elecraft for the K1
> (80/40/30/20/17/15 meters), if one designed filter boards for
> the nine bands that the K1 MPU can assign to a filter board
> (160/80/40/30/20/17/15/12/10 meters), a band-specific display cal
> adjustment will be stored for *each* of those nine bands.
>
> Mike / KK5F
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG.
Version: 8.0.101 / Virus Database: 270.4.1/1519 - Release Date: 6/25/2008 
4:13 PM