[Elecraft] K2 Modification Help

[AJSOENKE at aol.com]

Check the Elecraft web page for upgrades that either rig might be lacking  in 
support of the KPA. Also make sure your Firmwares are up-to-date. I would  
recommend doing a reset on the older rig after install hardware and prior to  
configuring setup. You may want to check your filter configs and record any  
configs that will get wiped in a reset. Of course all power settings thru the  
KAT will need to be cal'd too.

Al WA6VNN,  K3#31, K2# 4887  & 6281


++++++++++++++++++++++++++++
 
In a message dated 6/20/2008 9:56:26 A.M. Pacific Daylight Time,  
dbarker at visioncomm.net writes:
I'd keep the K2/10 with the KAT2. That's a  nice tuner and can't be used with
the PA. The only other option in the qrp  rig you don't have for the qro is
the K60RX. Might be better to move that  than to waste the KAT2.

Dan / WG4S / K2 #2456

<snip>
Here  are the two radios:

K2/10 S/N 02689 with KSB2, K160RX, K60XV, KNB2, KAF2,  KAT2

k2/100 S/N 3523 with KSB2 ( I have KNB2, K160RX and KAF2 kits to  install )

What I would like to do is pull the KPA100 out of the one radio  and make
what is currently the QRP radio a  K2/100.
</snip>

_______________________________________________
Elecraft  mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to  post to the list.
Subscriber Info (Addr. Change, sub, unsub  etc.):
http://mailman.qth.net/mailman/listinfo/elecraft     

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page:  http://www.elecraft.com
 



**************Gas prices getting you down? Search AOL Autos for 
fuel-efficient used cars.      (http://autos.aol.com/used?ncid=aolaut00050000000007)