[Elecraft] K3 and Quadra amp

[Joe Subich, W4TV]

Jerry, 

How did you wire your interface?  

Did you use "Band Data 1" (DIN8/262) or "Band Data 2" (DB15) 
on the Quadra? 

What are the symptoms ("No go")?  


Remember, the pin numbering on "Band Data 1" (DIN8/262) is 
different than the standard DIN8 - pin 6 on the standard 
connector is pin 7 ("D") on the 262, pin 7 on the standard 
is 8 (inhibit) on the 262, and pin 8 on the standard is 6 
("C") on the 262

My Quadra is still in storage ... I have not hooked it up 
yet but may cobble together a cable this week to try it. 

73, 

   ... Joe, W4TV 
 



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jerry Flanders
> Sent: Saturday, June 14, 2008 1:30 PM
> To: Elecraft at mailman.qth.net
> Cc: elecraft_k3 at yahoogroups.com
> Subject: [Elecraft] K3 and Quadra amp
> 
> 
> Anybody have the band data cable working? I carefully wired mine up 
> but no go. Sure would be nice to KNOW it can be made to work.
> 
> Jerry W4UK 
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com