[Elecraft] K3 #1029 Build

[Mike Fatchett W0MU]

No problem here with the speaker mounting.... 

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dick Dievendorff
Sent: Sunday, June 15, 2008 10:23 PM
To: drewko1 at verizon.net; Elecraft at mailman.qth.net
Subject: RE: [Elecraft] K3 #1029 Build

I plug and unplug serial cables into my PC and K3 all the time without
worrying about powering down either the PC or the K3. 

If equipment tended to be sensitive and were damaged by this action it would
be common knowledge, and vendors of this sort of equipment would be have to
deal with many customer support issues.  Successful vendors would implement
a solution that isn't bothered by these (reasonable) customer actions.  

I've not heard that this is a problem.

Congratulations on your successful build!

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of drewko1 at verizon.net
Sent: Sunday, June 15, 2008 9:04 PM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] K3 #1029 Build

The build went fine except for mounting the speaker. I think the supplied
fiber and toothed lock washers are too small in diameter for the width of
the speaker mounting slots. It's pretty difficult to keep them from slipping
through the slots, and then the screws go crooked..
I finally gave up and just used larger fiber washers.

I also updated the firmware, no problem. Used a straight serial connection
to the PC. But I'm wondering, would it be okay to plug in the serial cable
while the K3 and PC are powered up?

Here's an assembly hint... Use a magnetized screwdriver. It is much, much
more convenient! (The only screws that aren't magnetic are the display
window screws.)

73,
Drew
AF2Z

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com