[Elecraft] K3 - v2.02

[Mike Harris]

G'day,

OK, just something to unlearn and extra buttons to press.  Maybe it could 
be turned off if not required.

Regards,

Mike VP8NO

----- Original Message ----- 
From: "Lyle Johnson" <kk7p at wavecable.com>
To: "Mike Harris" <mike.harris at horizon.co.fk>
Cc: <Elecraft at mailman.qth.net>; "wayne burdick" <n6kr at elecraft.com>
Sent: Saturday, June 14, 2008 10:24 AM
Subject: Re: [Elecraft] K3 - v2.02


|> I upgraded my firmware to v2.02 Friday (13th!) night and now notice the
| > following:
| >
| > Previously the CMP and ALC display option was not available in CW 
mode.
| > Now it is.
|
| From firwmare release 1.99/1.76, the external ALC input has been 
activated.
|
| The ALC display mode must therefore be available in all modes so you can
| see if you are overdriving your amplifier, transverter or whatever else
| you may have attached tot he K3 that might develop ALC voltage.
|
| NOTE: DO NOT connect external ALC voltage to your K3 until you have
| performed the appropriate hardware modification!  Details for this will
| be posted to the website.
|
| 73,
|
| Lyle KK7P
|


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG.
Version: 8.0.100 / Virus Database: 270.3.0/1501 - Release Date: 13/06/2008 
06:33