[Elecraft] [K3] fast tuning with VFO B problem

[David Yarnes]

Werner,

I think you are using the wrong knob.  Setting VFO OFS to ON, enables use of 
the RIT knob as a fast tuning feature, not the VFO B knob.  Hoffentlich das 
ist die richtige antwort!

Dave W7AQK

----- Original Message ----- 
From: "Dr. Werner Furlan" <furlan at gmx.net>
To: <elecraft at mailman.qth.net>
Sent: Saturday, June 07, 2008 3:49 AM
Subject: [Elecraft] [K3] fast tuning with VFO B problem


>I have set Config VFO OFS to ON to use the VFO B for fast tuning, but it no
> longer works. I know it did, but no more.
> VFO OFS to off or on changes nothing.
> I have the latest firmware loaded.
> RIT/XIT are off of course.
> does anybody know what could be wrong?
>
> 73! de Werner OE9FWV
>
> -- 
> "Sometimes, a cigar is just a cigar."-- often attributed to Freud
>
>
> Email powered by Pegasus Mail free at <http://www.pmail.com>
> Homepage: <http://www.qsl.net/oe9fwv/>
> Fone +43 5522 75013
> Fax +43 820 555 85 2621
> Mobile +43 664 6340014
> Elecraft K2 #5203 K3 #656
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>