[Elecraft] the high speaker does not function any more

[Are LB3SA]

Denis,

I can only think of two likely reasons that your headphones work but your
speaker doesn't.:

1) Remove the top panel on your K2 and look for a connector on the front
right side of the radio (close to the on/off switch). It is labeled "SPKR"
and "P5". Make sure the connector is connected and pushed all the way in.

2) Or it could be that your headphone jack is defect. You can test this with
an ohm meter.

Good luck,

Are - LB3SA

KX1# 1864 
K2# 6498 
K3: Delivery late July 



F8DFK wrote:
> 
> Hello, which can help me? 
> on my K2, when I remove the jack of the headphone on the front panel, the
> high speaker does not function any more. I connected a high speaker on the
> back jack, but anything. There is only the jack of the headphone which
> functions. However all functioned before. 
> Denis F8DFK
> 
> 

-- 
View this message in context: http://www.nabble.com/the-high-speaker-does-not-function-any-more-tp17653558p17654630.html
Sent from the K2 mailing list archive at Nabble.com.