[Elecraft] K2 /100 RF output varies

[Evert Bakker (PA2KW)]

Hi Mike,

Yes I did not read your message carefully enough.
I had a similar problem as I wrote, but that wasn't in the tune mode.
Your problem has been solved easily :-)

I'll try solving my problem again next weekend.

Thanks for e-mail!

73's, Evert PA2KW
 


-----Original Message-----
From: Mike Short [mailto:mike.short at mchsi.com] 
Sent: Monday, June 02, 2008 01:00
To: evert at pa2kw.com
Subject: RE: [Elecraft] K2 /100 RF output varies

According to Don, W3FPR:

"Mike,

Check the KPA100 manual - during TUNE the power is reduced to 20 watts.  
If you need to TUNE at full power, you can either press the TUNE and 
DISPLAY buttons together, or rotate the power knob to the power level 
desired after the TUNE operation has started.

73,
Don W3FPR"


Operator Error on my part, 

Mike

No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 269.24.4/1476 - Release Date: 5/31/2008
12:25 PM