[Elecraft] K2 USB interface

[Don Wilhelm]

Robert,

You may find the best luck using the USB to serial adapter for PTT 
control for your PSK application and using the real serial port for 
communications with the logging application.

The PTT control is less critical for timing considerations than the 
communications done by the logging software.

73,
Don W3FPR

Robert Clutson wrote:
> When using the K2 with PSK I use the computer 9-pin serial port for the PTT. With only one serial port I then lose the digital read-out from the K2 into my logging program (LOG-EQF).
> Is there any published advice on connecting the K2 digital output to a USB port?
> thanks
> Robert (g0who)
>
>