[Elecraft] [K3] VFO A/B mode/filter settings

[David Wilburn]

I was surprised the first time this 'bit' me.  I had forgot about the 
note to push twice.  Works for me.  Great stuff, thanks.

David Wilburn
K4DGW




Don Wilhelm wrote:
> Bill,
> 
> Tap A>B twice.  This was introduced several versions of the firmware 
> back.  The folks who are operating cross mode do not want the mode 
> transferred, only the frequency, but other situations require that the 
> full contents are copied.
> So tap once to transfer only the frequency and tap twice to transfer 
> everything.
> 
> 73,
> Don W3FPR
> 
> Bill W5WVO wrote:
>> Seems like there must be an easy way to do this, but I don't seem
>> to know it. Help, please:
>>
>> I want to be able to copy the mode and filter settings from one
>> VFO to the other. For example, I have VFO A set up for narrow-band
>> SSB reception. But when I copy VFO A>B, only the frequency is
>> copied. The previous mode and filter settings for VFO B remain. I
>> can see instances where you want this behavior (like monitoring CW
>> with one VFO, SSB with the other), but for many of my purposes,
>> it's a real pain. Any way to change this behavior? Sorry if this
>> is RTFM.
>>
>>   
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>