[Elecraft] K3 interface with N1MM

[Bill Maddock]

Steve,

   This is correct - it works great - I have run mine at 38400 or
4800 either way with a standard serial cable with db9 and I have the
USB interface which configures fine also!

73 de Bill N4ZI


--- On Mon, 7/28/08, Stephen Reichlyn <aa4v at bellsouth.net> wrote:

> From: Stephen Reichlyn <aa4v at bellsouth.net>
> Subject: [Elecraft] K3 interface with N1MM
> To: Elecraft at mailman.qth.net
> Date: Monday, July 28, 2008, 5:43 PM
> Good Evening, All
> 
> I'd like to interface my K3 to N1MM. Am I assuming
> correctly that one needs 
> only connect the rig's RS232 port to a serial port
> on the computer to get full radio control AND CW sending?
> If not, an RS232 
> cable from K3 to computer and LPT1 keying interface
> from computer to rig?
> 
> Regarding RTTY, can I use a 15 pin video cable with the
> correct wires 
> connected for FSK using a DXP38 modem?
> 
> Any hints would be gratefully appreciated.
> 
> Thanks
> Steve AA4V
> K3 #855
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com