[Elecraft] ON4UN has a K3?

[Gary Bartlett VE1RGB]

    I have been noting with great interest the comments about which way to 
rotate the WIDTH control to narrow the filters.  Logic may tell you that 
clockwise should be wider, but some other instinctive force greater than 
that always wants me to turn it clockwise to go narrow.  Everyone up here 
who uses my K3 says the same thing.

    At first I thought this was maybe just a Canuck thing and I was too 
embarrassed to speak about it.  Then I wondered if it was my advancing age, 
and I didn't want to talk about that either.  Today, however, I am comforted 
to know that I/we are not alone.

    Now if Wayne would only reprogram the rig so that VOX would default to 
OFF on shut-down, I wouldn't have to concern myself about trying to remember 
to turn VOX off myself so that the rig does not actually transmit during the 
booting of the attached computer and again when the logging program starts 
on next turn-on of the rig.

    73,
    Gary, VE1RGB, K3 #095

----- Original Message ----- 
From: <Paul at N4LCD.com>
To: <Elecraft at mailman.qth.net>
Sent: Monday, July 28, 2008 10:56 AM
Subject: Re: [Elecraft] ON4UN has a K3?


>
>
>
>>The
>>only one I had trouble with was the WIDTH control. For some reason I
>>kept expecting the filter b/w to become narrower as I turned it
>>clockwise...
>
> Same here. That's the only knob that I consistently turn the wrong way.
>
>
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com