[Elecraft] K3 Firmware 2.19

[Stan Rife]

    Also with my K3 there is a significant reduction  in the audio level 
when NR is on. I don't see how the AGC would affect the NR. It's just a 
function of the filtering that reduces the volume when the NR is 
activated. Or is there something I am missing.

Stan
W5EWA
Houston, TX
K2/100 SN 4216
K3/100 SN 0690



Roger Stein wrote:
> Hi Roy,
>
> Try AGC THR = 5 and AGC SLP = 8....and  or experiment with varying
> those two parameters as you monitor a signal.
> My AF gain is at the 9 o'clock position, AFX on, BIN option.
>
> I use a couple of small RCA/Radio Shack speakers.
>
> To my ears, the difference between NR on/off is really close to the
> same audio level.
>
> But as Lyle says, experiment, it is quite revealing!!
>
> Best of luck!
>
> 73, Roger WA7BOC
> K3 #75
>
> On Wed, Jul 23, 2008 at 7:34 PM, Roy Morris <w4wfb at carolina.rr.com> wrote:
>   
>> I think I am about ready to go back to 2.16.  I find the receive audio to be too weak with NR and attenuation engaged.  Roy Morris  W4WFB
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>  http://mailman.qth.net/mailman/listinfo/elecraft
>>
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>>
>>     
>
>