[Elecraft] K3 Beta Firmware Release -- MCU Revision 2.19

Jon K Hellan hellan at acm.org
Wed Jul 23 05:00:12 EDT 2008


Mine came with what looks like the latest beta at the time of shipping (2.11, I 
  think). Anyway, it's certainly newer than the latest regular release.

Is it recommended that I keep following the betas, or wait until one of the 
releases more recent than mine is declared "regular"?

73
LA4RT Jon

wayne burdick wrote:
> K3 beta-test firmware revision 2.19 is now available. Details appear 
> below and in the release notes.
> 
> The use of beta-test firmware is encouraged, but optional. Please send 
> any problem reports to k3support at elecraft.com. For instructions on how 
> to obtain and load beta firmware, please see:
> 
>   http://www.elecraft.com/K3/k3_software.htm
> 
> 73,
> Wayne
> N6KR
> 
> * * *
> 
> MCU 2.19 / DSP 1.87, 7-22-08
> 
> * AGC: Slope is now approximately linear in dB.  Threshold
>   moved about 10 dB lower, closely matching earlier DSP revisions.
> 
> * USER INTERFACE: Minor clean-up of menu entry text and parameters,
>   help text, error messages, etc., to make operation more intuitive.
> 
> * SUB RX ON/OFF now has no effect on SPLIT, RIT, or XIT.
> 
> * SUB RX SYNTHESIZER is no longer updated when sub RX is turned off,
>   even with VFOs linked. This prevents an audio artifact when tuning. Also
>   eliminated interaction between main and sub synthesizers during T-R
>   switching that was causing keying artifacts at very specific frequencies
>   on some bands.
> 
> * IIR DSP FILTER ON/OFF SELECTION now applies to both main and sub
>   receivers. (IIR filter on/off is selected by tapping the ‘7’ switch 
> while in the
>   FLx BW menu entry. IIR filters apply only to 100 Hz and narrower DSP
>   bandwidths. They have slightly more ringing than the default FIR 
> filters.)
> 
> 
> ---
> 
> http://www.elecraft.com
> 
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com



More information about the Elecraft mailing list