[Elecraft] new K1: no transmit on Band 2

[Elwood C. Downey]

Hi Don,

Thanks for the reply. I traced until I found good signal entering RF-J7-1 but almost nothing coming out RF-J7-8. I saw
nothing obviously wrong but reheated all the pins to K2 and the surrounding caps. Now everything is running fine. I
must have been optimistic thinking receive was working too.

73,

Elwood


On Mon, July 21, 2008 8:50 am, Don Wilhelm said:
> I hope that helps.  If not, get out your RF Probe (or 'scope)
>
> Elwood C. Downey wrote:
>> Again: receive OK both bands, xmit ok band 1, no power out on band 2.