[Elecraft] Computer Control of K2

[a.yoshida]

Tom

I have no problem to control K2 by logging program.
Have you read KIO2 manual ?
All you need is described in the manual.

Good Luck

73
aki  ja1nlx

----- Original Message ----- 
From: "NG3V" <ng3v at comcast.net>
To: <elecraft at mailman.qth.net>
Sent: Tuesday, July 22, 2008 12:10 PM
Subject: [Elecraft] Computer Control of K2


> Good Evening Group,
>
> Here's an odd one.  I decided to rebuild my ham desk and upgrade my
> computer.  I wound up putting the old computer back where it was, so 
> nothing
> was changed there.
>
> After all was done, I hooked everything back up, and - while the K2, 
> KPA100
> and KAT100 work fine - HRD will not recognize the radio.
>
> I have checked the cables, tried both native serial ports on the mb and 2
> ports on a PCI card - even reinstalled all the drivers.
>
> I have tried other control programs - no joy.
>
> I have opened the K2 and checked everything visually and checked for
> evidence of smoke leakage.
>
> I am at a loss, so I pose you two questions:
>
> 1.  Can anyone think of something I should look at?
>
> 2.  Can I use a USB to Serial dongle to hook up the K2 just to try 
> something
> else?
>
> Thanks,
>
> 73,
>
> Tom
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com