[Elecraft] KRX3 - I mess up the installation- need help

[Don Wilhelm]

Johnny,

I will leave the detailed troubleshooting to those who have the KRX3,
but I suggest for starters.
1) load the latest firmware - If you have older firmware may not contain
all the KRX3 support required.
2) Check and recheck to be certain everything is plugged in correctly.

73,
Don W3FPR

Johnny Siu wrote:
> Hello Group,
>
> Let me just re-written my emails as follows:
>
> After installation of the KRX3, I notice the following
> errors:
>
> 1. In CONFIG: KRX3.  I only get NOR but NOT NOR-ANTx;
> 2. in CONFIG: VFO IND, I canNOT turn to 'yes'
> 3. when calibrate the 2nd synthesier, I get 'busy'
> first, then E00039 and ERR VC4 upon completion.
>  
>  Can any of you kindly advise where to start trouble
>  shooting.
>  
> TNX
>  
> Johnny Siu VR2XMC
> K3#46
>
>