[Elecraft] Signalink USB/RTTY and K3

[Lee Buller]

I've had this working before, but I think there have been some changes in the software releases that have change one thing.

It seems that I cannot get enough audio to the K3 to drive it to 100 watts.  I have the K3 in AFSK mode when in Data mode.  I am driving the rig from the back input connector.

I have to turn the line in up to 50 or more and then turn up the TX drive on the Signal Link to get around 80 watts output.  I have about 4 to 5 bars on the ALC, but it seems not wanting to drive to 100 watts output.

Lee - K0WA



In our day and age it seems that Common Sense is in short supply.  If you don't have any Common Sense - get some Common Sense and use it.  If you can't find any Common Sense, ask for help from somebody who has some Common Sense.  Is Common Sense divine?