[Elecraft] K3 Firmware Bug

[Dick Dievendorff]

You don't have to have a filter in FL1 unless you want to transmit on FM,
and in that case, you need the 13 KHz FM filter in FL1.

You must set the CW and SSB transmit filter to a 2.7 or 2.8 KHz filter,
whatever slot it is in.


It's recommended that you put the filters in from widest to narrowest,
starting at FL1.  However if you have plans for an FM filter alter and an AM
filter later, you might start with the 2.7 or 2.8 KHz filter in FL3, for
example.

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Lee Buller
Sent: Monday, July 14, 2008 11:05 AM
To: Dr. James C. Garland; Elecraft Reflector
Subject: Re: [Elecraft] K3 Firmware Bug

If I am not mistaken....you have to have a filter in the FL1 slot.  The K3
has to transmit through the widest filter....and I think that should be in
the FL1 slot.

Your Mileage May Vary

Lee - K0WA

 

In our day and age it seems that Common Sense is in short supply.  If you
don't have any Common Sense - get some Common Sense and use it.  If you
can't find any Common Sense, ask for help from somebody who has some Common
Sense.  Is Common Sense divine?
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com