[Elecraft] Issues with cw keying line in N1MM with K3?

[Bill Maddock]

It must have been the computer - went back and reloaded N1MM
and then latest update and it works fine now after reboot! - go figure - sorry about all tha bandwidth

73 de Bill  N4ZI  www.n4zi.net/Home.htm


--- On Sat, 7/12/08, Stephen W. Kercel <kercel1 at suscom-maine.net> wrote:

> From: Stephen W. Kercel <kercel1 at suscom-maine.net>
> Subject: Re: [Elecraft] Issues with cw keying line in N1MM with K3?
> To: n4zi96 at yahoo.com, elecraft at mailman.qth.net
> Date: Saturday, July 12, 2008, 9:45 AM
> Bill:
> 
> You have a timing problem due to the fact that several
> computational 
> processes in the N1MM program are simultaneously competing
> with your 
> CW process for access to the serial link between your
> computer and your radio.
> 
> The solution in to use the WinKey keyer. Check out
> k1el.tripod.com
> 
> The WinKey operates through a USB port in the computer and
> bypasses 
> the serial link being used by all the other processes.
> 
> N1MM works with WinKey. I use a K2/WinKey/N1MM
> configuration in 
> contests and I am very happy with it.
> 
> I have no financial interest in WinKey. I am merely a happy
> customer.
> 
> 73,
> 
> Steve Kercel
> AA4AK
> 
> 
> 
> At 09:29 AM 7/12/2008, Bill Maddock wrote:
> >I am having trouble with choppy cw coming off the
> computer
> >into my keying line using N1MM - anyone have any ideas?
> >
> >Thanks and 73,
> >
> >Bill  N4ZI
> >
> >
> >
> >_______________________________________________
> >Elecraft mailing list
> >Post to: Elecraft at mailman.qth.net
> >You must be a subscriber to post to the list.
> >Subscriber Info (Addr. Change, sub, unsub etc.):
> >  http://mailman.qth.net/mailman/listinfo/elecraft
> >
> >Help: http://mailman.qth.net/subscribers.htm
> >Elecraft web page: http://www.elecraft.com