[Elecraft] Which Filter for Transmit

[Don Wilhelm]

Mike,

Until further information to the contrary is available from Elecraft, 
you must select the 2.7 or 2.8 filter for SSB, Data and CW transmit.  
The AM transmit filter must be 6 kHz and the FM transmit filter must be 
13 kHz.
Any other settings will result in failure and a ERR TXF (Error Transmit 
Filter) message.

See the Errata sheet that shipped with your K3.

73,
Don W3FPR

Mike Miller wrote:
> If I have the 2.1 filter selected....for receive...on main receiver and I transmit...am I transmitting thru the stock 2.7 kc filter or thru the 2.1 filter?  Does the radio transmit thru the widest filter?
>
>
>
>
> Mike Miller KA5SMA
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com 
> Version: 8.0.138 / Virus Database: 270.4.7/1542 - Release Date: 7/9/2008 6:50 AM
>
>
>
>