[Elecraft] K3: PSK31 and DigiPan Questions

[Don Wilhelm]

Joe,

What data mode are you in - it must be DATA A (press the AFX/DATA MD 
button and turn VFOB to change.
Are you in USB with both Digipan and the K3 data mode - press AFX/DATA 
MD button and  hold ALT to toggle between USB to LSB if you need to 
change the K3.

Yes, BPSK should work, and the cable from the K3 line out jack should be 
stereo.  Digipan will normally use only the left channel (the tip of the 
stereo plug).

73,
Don W3FPR

Joe Word wrote:
> I have read the Elecraft write-up and have questions. I am on 14.070
> and get some data, but not human readable. Using sound card in by
> Compaq Deskpro computer.
>
>
> 1. Do I use a stereo or mono plug for line out? Using stereo now.
>
> 2. Do I use BPSK31 or QPSK31? Using BPSK31 now.
>
> 3. Assume the K3 should be set to DATA Mode?
>
> What else do I need to know? I am starting at ground zero.
>
>