[Elecraft] K3: More on AF Gain delay

[Joel R. Hallas]

Thanks for the suggestion Don, but that wasn't it either. Any other
thoughts?

 

>Remove both knobs from the concentric shafts and see if the nut holding 

>the control to the front panel has loosened.  Yes, the pots are fastened 

>to the board so you might not notice it at end of rotation, but a loose 

>mounting nut can impart a 'squishy' feel when the knob is rotated 

>because of the slight flexing.

 

>73,

>Don W3FPR

 

 

Regards, Joel

Joel R. Hallas