[Elecraft] RE: K3: AF Gain delay?

[Don Wilhelm]

Joel,

Remove both knobs from the concentric shafts and see if the nut holding 
the control to the front panel has loosened.  Yes, the pots are fastened 
to the board so you might not notice it at end of rotation, but a loose 
mounting nut can impart a 'squishy' feel when the knob is rotated 
because of the slight flexing.

73,
Don W3FPR

Joel R. Hallas wrote:
> Thanks to all for the suggestion of a cracked knob. I was hoping, but mine
> didn't seem cracked, and there was no play at the ends of travel. I swapped
> the AF and RF gain knobs to be sure, and it made no difference. Any other
> ideas?
>   
>