[Elecraft] K3 Mystery Part

[Don Brown]

Hi

This sounds like the mounting pad for the speaker shield. Check the assembly 
manual page 46. This pad is usually already installed inside the shield and 
you just remove the paper backing and stick it to the back of the speaker. 
Elecraft may be now supplying the pad separate from the shield or you may 
have an extra one.

Don

--------------------------------------------------
From: "Brad Johnson" <aa5ch at suddenlink.net>
Sent: Saturday, July 05, 2008 1:01 AM
To: <elecraft at mailman.qth.net>
Subject: [Elecraft] K3 Mystery Part

> I just completed the parts inventory of my K3 and the accessories. I'm 
> pleased to report that with the exception of the 6 kHz filter that is 
> backordered, all components and hardware appear to be present and 
> accounted for.
>
> I have one part that doesn't show up on any of my parts lists. It is a 
> rubber disc approximately 1 inch in diameter and 1/4 inch thick, with an 
> adhesive backing. It looks like it could be used as a foot for the 
> chassis, but is not listed as such. .
>
> I quickly glanced through the assembly manual and didn't see a reference 
> to it. Perhaps I  overlooked  something?
>
> Can anyone tell me what it is used for?
>
> Thanks and 73,
>
> Brad
> AA5CH
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>