[Elecraft] I am running PSK 31 need some pointers!

[Greg]

Due to the different levels present between the Line In and the FP or RP mic 
inputs you will need to adjust the VOX to a higher level.  When I tried this 
I had to "almost" set the VOX to max....but not quite.

Why use VOX at all?  If you have the radio connected to a computer using a 
soundcard program why not utilitze the RS-232 line already connected?  You 
can do this by setting the PTT-KEY CONFIG menu item and making the correct 
DTR/RTS settings in the software you are using.

73
Greg
AB7R

----- Original Message ----- 
From: "Bruce McLaughlin" <bmclaugh at bex.net>
To: <n4zi96 at yahoo.com>; <elecraft at mailman.qth.net>
Sent: Friday, July 04, 2008 6:15 PM
Subject: RE: [Elecraft] I am running PSK 31 need some pointers!


> Bring up the main menu and adjust VOX GN.  Whatever works OK with your 
> mike
> should be OK for PSK.
>
> Bruce-W8FU
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bill Maddock
> Sent: Friday, July 04, 2008 7:08 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] I am running PSK 31 need some pointers!
>
> Just got my K3 running psk and I am using VOX to start and stop it -
> which seems to work fine - Is there a VOX threshold control so I
> don't over drive it? - I will using Digipan with DX4WIN at 14.07015
> with marker freq of 1450hz - come and get me!
>
> Thanks and 73,
>
> Bill N4ZI  K3 #1059
>
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> No virus found in this incoming message.
> Checked by AVG.
> Version: 8.0.101 / Virus Database: 270.4.3/1529 - Release Date: 7/1/2008
> 7:23 PM
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.138 / Virus Database: 270.4.5/1533 - Release Date: 7/3/2008 
> 7:19 PM
>
>
>