[Elecraft] K3 KRX3 Install

[Bruce McLaughlin]

Gosh, I wouldn't cancel.  Maybe you should have Elecraft install it if your
are squeamish about it.  I have a factory built K3 and was given the option
of having them hold it until the 2nd rx was available.  I opted to take
delivery of the rig (on May 9) and install the 2nd rx myself when it was
available.  I did build a K2/100 and so I ought to be able to handle this (I
hope).  On the other hand, I also ordered the DVR and so I may wait to
install the 2nd receiver until after I get the DVR so I don't have to do
surgery on the K3 twice.  After all, there is only so much ether available
to me . . . I do think the K3 deserves to be spared as much pain as possible
and should be put to sleep while the operation is undertaken . . . 

Bruce-W8FU

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dave Agsten
Sent: Friday, July 04, 2008 4:38 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 KRX3 Install

I'm wondering what those who have installed the 2nd RX in their K3 think of
the procedure? I took a quick look at the manual and it seems like you have
to take half the radio apart for this. I'm not sure I want to do this to a
rig that is currently working FB. I'm not crazy about pulling the front
panel apart for one. It looks like the 2nd RX installation in the Flex 5000A
was a piece of cake compared to the K3.

Any comments on how the install went would be appreciated. Did anyone
installing the 2nd RX into an operating K3 end up with the radio not working
post-install? I should be getting my Katiegram for the KRX3 soon and need to
decide if I'm going to cancel or not.  

Tnx es 73,
Dave N8AG


      
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
No virus found in this incoming message.
Checked by AVG. 
Version: 8.0.101 / Virus Database: 270.4.3/1529 - Release Date: 7/1/2008
7:23 PM