[Elecraft] Band decoder and Tx Inhibit

[G3SJJ]

I confirm the TopTen Band Decoder works fine with my K3, Andy.

Chris G3SJJ


Andrew Faber wrote:
> Chris,
> Good luck with it.  I have the TT Decoder powered by an independent 12 
> volt source.  It has internal pull-up resistors, so there appears to 
> be no connection needed other than the ones I mentioned.  It took me a 
> bunch of trial and error time to figure this out.  Let us know how it 
> works.
>  I emailed N3RD a while ago to let them know.  Dave said he had a K3 
> on order, and that they did intend to offer K3 cables.  I made up a 
> "generic" cable from my TT DX Doubler to the K3, and that seems to 
> work well also. It's nice to use inputs all on the back of the K3, so 
> there are no cables to the front panel.  Only issue is that the Mic 
> and Headphone jacks on the back are pretty frail and don't make very 
> positive contact sometimes.
>  73, andy, ae6y