[Elecraft] K3/100 Kit #307 Lift Off

[Don Wilhelm]

Brett,

Try McMaster-Carr (www.mcmaster.com) PN 91185A221 4-40 1/4 inch long 
with a plastic knurled head 5/16 diameter and 11/64 inch high.   They 
only come in boxes of 100, so you would have some to share.

73,
Don W3FPR

Brett Howard wrote:
> I'd be willing to pay a 10 to 15 dollar adder for knurled knobs that allow
> one to take the top of quickly and easily to show off the guts...  I'd want
> them to be relatively low profile though.
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of d.cutter at ntlworld.com
> Sent: Tuesday, January 29, 2008 2:28 AM
> To: David Pratt; Elecraft Reflector
> Subject: Re: Re: [Elecraft] K3/100 Kit #307 Lift Off
>
> If you are going to be taking them apart so often to show folks :o)  perhaps
> some nice black knurled thumb screws would be in order.  
>
> David
> G3UNA
>
>   
>> From: David Pratt <david at g4dmp.co.uk>
>> Date: 2008/01/29 Tue AM 09:44:00 GMT
>> To: Elecraft Reflector <elecraft at mailman.qth.net>
>> Subject: Re: [Elecraft] K3/100 Kit #307 Lift Off
>>
>> In a recent message, Stewart Baker <stewart at baker.nildram.co.uk> wrote
>>     
>>> Only slight negative is that there should be a few more flat black
>>> case screws supplied as spares. Exact amount needed supplied,
>>> however I am sure that I will lose one or two when I open the case
>>> to show off the craftsmanship...
>>>       
>> I'll agree to that one, Stewart. There were plenty of pan heads as 
>> spares but the flat heads were exactly the right number. Fortunately, I 
>> have three left over from the assembly of my K1.
>>
>> 73
>> -- 
>> David G4DMP
>> Leeds, England, UK
>> ------
>>
>>
>>     
>
> -----------------------------------------
> Email sent from www.virginmedia.com/email
> Virus-checked using McAfee(R) Software and scanned for spam
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
>