[Elecraft] K3/100 Kit #307 Lift Off

[Stan Rife]

	How about some Dzus (sp?) type twist lock fasteners? 

Stan Rife
W5EWA
Houston, TX
K2 S/N 4216


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Brett Howard
Sent: Tuesday, January 29, 2008 4:52 PM
To: d.cutter at ntlworld.com; 'David Pratt'; 'Elecraft Reflector'
Subject: RE: Re: [Elecraft] K3/100 Kit #307 Lift Off


I'd be willing to pay a 10 to 15 dollar adder for knurled knobs that allow
one to take the top of quickly and easily to show off the guts...  I'd want
them to be relatively low profile though.

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of d.cutter at ntlworld.com
Sent: Tuesday, January 29, 2008 2:28 AM
To: David Pratt; Elecraft Reflector
Subject: Re: Re: [Elecraft] K3/100 Kit #307 Lift Off

If you are going to be taking them apart so often to show folks :o)  perhaps
some nice black knurled thumb screws would be in order.  

David
G3UNA

> 
> From: David Pratt <david at g4dmp.co.uk>
> Date: 2008/01/29 Tue AM 09:44:00 GMT
> To: Elecraft Reflector <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K3/100 Kit #307 Lift Off
> 
> In a recent message, Stewart Baker <stewart at baker.nildram.co.uk> wrote
> >Only slight negative is that there should be a few more flat black 
> >case screws supplied as spares. Exact amount needed supplied, however 
> >I am sure that I will lose one or two when I open the case to show 
> >off the craftsmanship...
> 
> I'll agree to that one, Stewart. There were plenty of pan heads as
> spares but the flat heads were exactly the right number. Fortunately, I 
> have three left over from the assembly of my K1.
> 
> 73
> --
> David G4DMP
> Leeds, England, UK
> ------
> 
> 

-----------------------------------------
Email sent from www.virginmedia.com/email
Virus-checked using McAfee(R) Software and scanned for spam

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com