[Elecraft] k2 earphone jack

[Don Wilhelm]

If you are going to add the toggle switch, there is no need to replace 
the jack.
The toggle switch replaces the contacts that no longer work.
73,
Don W3FPR

drewko1 at verizon.net wrote:
> One solution is to wire in a speaker/headphone toggle switch when you
> replace the jack; then leave the headphones plugged in all the time.
> That will eliminate wear on the jack. (It's also lot more convenient
> if you do a lot of plugging and unplugging of the headphones.) I
> mounted the switch on the rear panel, below the speaker jack. I posted
> a detailed article about this some months ago. 
>
> 73,
> Drew
> AF2Z
>
>