[Elecraft] K3 Amtor receiver recovery times - update

[Lyle Johnson]

I can send you some shots from my oscilloscope.  With either the 2.7 kHz 
or 2.8 kHz SSB filter (I tested both), in SSB mode, from release of PTT 
I measure ~22 ms to audio. There is a possible spike or other amplitude 
perturbation at about 38 ms and lasts for about 2 ms, then things are 
steady from 40 ms on out.

This is with a sign gen attached and pumping in a reasonable signal (S5 
to S9, didn't write it down).

73,

Lyle KK7P